GETTING PAID

How to Accept Client Payments: Best Methods for Freelancers

The payment method on your invoice isn't just an administrative detail — it's one of the biggest levers you have for getting paid faster. The right option removes friction for the client and puts money in your account sooner. The wrong one adds steps, confusion, and delay.

In short: the best payment method is whichever one gets money into your account fastest with the least friction for the client. For domestic work, bank transfer (ACH) is usually cheapest while cards via Stripe are fastest and easiest for the client; for international clients, Wise typically beats a traditional bank wire on both cost and transparency. Offer two options — one low-cost, one low-friction — and always include a one-click payment link.

Most freelancers and small agencies pick a payment method once — usually whatever the first client asked for — and never revisit it. But the method you accept has a real, measurable effect on how quickly invoices get paid. A client who has to find routing numbers, log in to an unfamiliar platform, or figure out a foreign currency conversion is a client who will delay until they have a quiet moment. That moment never comes.

This guide runs through the best ways to accept payments as a freelancer or small agency — what each option costs in time and money, and how to choose the right combination for your work. The goal throughout is the same: get paid, fast, with as little friction as possible for everyone involved.

Why payment method friction causes late payments

Before comparing methods, it's worth being direct about the connection. Late payments aren't always about bad faith. A significant share of them happen because paying was inconvenient when the invoice arrived, and the client meant to come back to it.

Every step between “client opens your invoice” and “payment is sent” is a step where the moment can be lost:

  • Having to log in to a bank portal they haven't used in weeks
  • Looking up your account details because they're not on the invoice
  • Dealing with a currency conversion they weren't expecting
  • Being presented with a platform they don't have an account on

Reducing friction doesn't mean accepting every payment method under the sun. It means making the most likely path frictionless: a single-click payment link, an amount that arrives in full, and a process the client can complete in under two minutes on their phone.

That principle connects directly to how to prevent late payments — the payment method question belongs in the same upstream conversation as your terms and your deposit.

Bank transfer / ACH

What it is: a direct transfer from the client's bank account to yours. Called ACH in the United States, BACS in the UK, EFT in Canada, and so on.

Speed: slow to medium. Domestic ACH transfers in the US typically take one to three business days to clear. Faster options (same-day ACH, Faster Payments in the UK) exist but may require your client's bank to support them.

Fees: low to none for domestic transfers. Some banks charge a small outgoing fee, but neither side usually pays a percentage. This is the cheapest method for large invoices.

Friction for the client: moderate to high. They need your account number and routing number (or sort code and account number in the UK). Most clients can do this, but it involves logging in to their bank, entering your details manually, and waiting for confirmation. If those details aren't on the invoice, they have to find them — and that's where delay lives.

Best for: large invoices where the percentage fee from card processing would be significant, long-term clients who have already set up your details, and B2B clients whose finance teams prefer bank transfers.

Watch out for: typos in account details, delayed clearance timing that makes it hard to know exactly when funds will arrive, and the occasional bank that holds incoming transfers for new payees.

Rule of thumb: if you use bank transfer, put your complete banking details directly on every invoice — account name, account number, routing number (or equivalent), and bank name. Never make the client dig for them.

Card payments via Stripe

What it is: Stripe is a payment processor that lets clients pay by credit or debit card through a hosted payment link or checkout page. You send the invoice with a “Pay now” link; the client clicks, enters their card details, and the payment is confirmed immediately.

Speed: fast. Card payments confirm in seconds and typically settle to your bank account within one to two business days (sometimes the next business day, depending on your plan).

Fees: Stripe charges a percentage plus a small fixed fee per transaction. The specific rate varies by country and card type, but the US standard online-card rate is 2.9% + $0.30, with international cards and manually keyed cards costing more. For a $1,000 invoice paid by a US card, that's roughly $29.30 absorbed by you. One detail many freelancers miss: Stripe can also collect payment by ACH bank debit at a much lower rate — 0.8% capped at $5 per transaction in the US — so routing a large invoice through a Stripe payment link as a bank debit keeps the one-click experience without the percentage fee. (Stripe sets these rates and updates them periodically; check the current pricing page before quoting a number.)

Friction for the client: low. Most clients have a card in their wallet and are accustomed to online card payments. No account required, no bank login, no unfamiliar platform. The experience is identical to buying something online.

Best for: invoices under a few thousand dollars where the convenience of immediate confirmation outweighs the fee, clients who prefer paying by card for their own expense-tracking purposes, and anyone who wants to offer a one-click payment link in their invoice reminders.

Watch out for: the percentage fee adds up meaningfully on larger invoices. Some clients also prefer not to put business expenses on a card due to their own accounting or credit-limit constraints. Before you write off a card fee as too expensive, it's worth weighing it against the cost of the invoice sitting unpaid — our late payment cost calculator shows what a slow-paying invoice actually costs you in tied-up cash.

PayPal

What it is: PayPal is a widely recognized payment platform that allows clients to pay using their PayPal balance, a linked bank account, or a card. It's been around long enough that most clients have an account or will recognize the name.

Speed: fast for PayPal-to-PayPal transfers (usually instant). Withdrawals to your bank account typically take one to three business days, though instant transfer options exist for a small fee.

Fees: PayPal charges a transaction fee for receiving business payments — a percentage plus a fixed amount. In the US, the standard goods-and-services rate is 2.99% + $0.49, and PayPal-issued invoices or Checkout run higher at 3.49% + $0.49. Cross-border payments add roughly 1.5% on top, and currency conversion carries a further markup of around 3% — so an international invoice paid via PayPal can quietly cost 5% or more of its value. (Rates are set by PayPal and change periodically; confirm the current schedule before relying on a specific number.)

Friction for the client: low to moderate. If they have a PayPal account, payment is fast. If they don't, they can still pay as a guest by card, though the experience is more cluttered than a clean Stripe checkout.

Best for: clients who already use and trust PayPal, creative and freelance work where the brand is familiar, and international clients where PayPal's currency handling is simpler than a manual wire.

Watch out for: PayPal can place holds on funds from new clients or unusual-pattern transactions. Their dispute process — though rare for legitimate invoices — can freeze funds temporarily. The platform's fees for business transactions are not always clearly displayed to the payer.

Wise (formerly TransferWise) for international clients

What it is: Wise is a money transfer service built specifically for cross-border payments. Unlike a traditional bank wire, Wise uses local account details in both countries to minimize exchange rate loss and fees.

Speed: one to two business days for most currency corridors. Some routes are faster.

Fees: generally lower than a bank international wire. Wise charges a transparent fee (usually a small percentage of the transfer amount) and uses the mid-market exchange rate rather than a marked-up bank rate. For international work, this usually means the client pays less and you receive more than a standard wire.

Friction for the client: low once set up. The client needs a Wise account (free to open) or can send from their bank to Wise's local receiving account in their country. The key advantage is that neither side pays significant currency conversion overhead.

Best for: international clients paying in a different currency, freelancers and agencies with a meaningful share of overseas work, any situation where a bank wire would otherwise eat a significant portion of the invoice value.

Watch out for: not every client will want to create a Wise account. For one-off international payments, some clients prefer a bank wire even with higher fees, simply because it's a system they already use.

Wise vs Payoneer: Payoneer is the other popular cross-border option, and some agencies and overseas clients already use it. It works similarly — local receiving accounts and lower fees than a SWIFT wire — but tends to suit freelancers whose clients hire through marketplaces or who already hold a Payoneer balance. Wise generally wins on exchange-rate transparency for direct client invoices; Payoneer is worth offering if a specific client asks for it. Confirm both providers' current fees before quoting, since they vary by corridor and account type.

Wire transfer / international bank transfer

What it is: a direct bank-to-bank transfer across borders, routed through the SWIFT network. This is the traditional method for international payments.

Speed: typically two to five business days. Some corridors are faster; some are slower.

Fees: significant on both sides. The sending bank usually charges a flat fee; intermediary banks may deduct fees from the transfer; your bank may charge a receiving fee. The total cost can be substantial, and it's not always predictable in advance.

Friction for the client: moderate. They need your full banking details, including SWIFT/BIC code and IBAN (if applicable). Their bank may require a branch visit or a specific portal for international wires.

Best for: clients who have no other workable option, very large invoices where even a fixed wire fee is a small percentage of the total, and situations where both parties already have established banking relationships.

Watch out for: the fee structure is opaque. “I sent $5,000” can easily arrive as $4,850 after intermediary fees. If you're receiving a specific amount, clarify upfront who covers the wire fees — and consider Wise as an alternative.

Choosing the right combination

No single method is right for every invoice or every client. The practical approach is to offer two options — one for domestic and one for international — and make both completely frictionless on your invoice.

A setup that works for most freelancers and small agencies:

  • Domestic clients: a card payment link (Stripe) as the primary option, plus bank transfer details for clients who prefer it or for large invoices where the fee matters
  • International clients: Wise as the default, with a traditional wire transfer option for clients who request it

Whatever you choose, the payment details belong on every invoice, every time. This is worth repeating because it's the most common gap: a beautifully formatted invoice that says “bank transfer preferred” but doesn't include the actual bank details. If paying requires the client to send you an email asking for your details, you've introduced a delay that could be days. See the guidance on invoice payment terms wording for how to structure the payment section of your invoice so nothing is left to assumption.

How payment terms interact with payment method

The speed at which a client pays is partly about method, but it's also about the terms on the invoice. Net 30 with a Stripe payment link will still be slower than Net 15 with the same link. The method reduces friction; the terms set the expectation.

If you're trying to shorten your payment cycle, the most effective move is often a combination: shorter terms plus a one-click payment link. Net 15 with a “Pay now” button is a meaningfully different invoice experience than Net 30 with just your bank details buried in a note field.

For a full breakdown of which terms structure gets you paid fastest and when each one makes sense, Net 15 vs Net 30 vs Due on Receipt covers the tradeoffs in plain language.

A simple payment method comparison

| Method | Typical speed | Fee to you | Client friction | Best for | |---|---|---|---|---| | Bank transfer / ACH (direct) | 1–3 days | Low / none | Moderate | Large invoices, repeat clients | | Stripe (card) | Next day | 2.9% + $0.30 (US) | Low | Most domestic invoices | | Stripe (ACH debit) | 1–3 days | 0.8%, $5 cap (US) | Low | Large domestic invoices | | PayPal | Instant–3 days | 2.99% + $0.49 (US) | Low–moderate | Familiar clients, freelance work | | Wise | 1–2 days | Low (mid-market rate) | Low (once set up) | International clients | | Bank wire / SWIFT | 2–5 days | High + variable | High | Large international invoices |

Fee figures above are standard US published rates as of November 2026 and vary by country, card type, and account. Always confirm current pricing with each provider before quoting a client. Rates shown are what you pay to receive, not what the client pays.

What about offering early payment discounts?

Some freelancers and agencies experiment with “2/10 net 30” terms — a small discount (typically 1–2%) if the client pays within 10 days. It can work for clients who are genuinely watching their cash flow and want to take advantage of a saving. For most freelance relationships, though, the cleaner lever is simply reducing friction: a client who can pay in 60 seconds doesn't need a discount incentive.

If you do use early payment discounts, be precise about the wording — invoice payment terms wording has a section on the exact phrasing that makes the offer clear and enforceable.

Make sure reminders include the payment link

Offering a good payment method matters. Making sure it appears at every touch point — especially in follow-up reminders — is what closes the loop.

An invoice sent on Day 0 with a payment link works best when the Day 7 reminder includes the same link again, right there in the email, one click away. A reminder that says “please pay the attached invoice” without a link is a reminder that asks the client to find the original email, open the invoice, and find the link themselves. That's three extra steps too many.

For the full timing of when to send reminders and what to include, how long to wait before following up on an invoice lays out the day-by-day cadence. And if you want that follow-up sequence to run automatically — with the payment link re-inserted each time, stopping the moment payment lands — InvoiceSnooze handles exactly that, connecting to Stripe, PayPal, or a CSV of your existing invoices.

Frequently asked questions

What's the fastest way to get paid by a client?

A card payment link (via Stripe or similar) with short terms — Net 15 or Due on Receipt — is typically the fastest combination. Card payments confirm immediately and settle within a day or two. The key is making the link visible and one-click on both the invoice and any follow-up reminders. Clients pay when paying is easy; every extra step you remove tends to shorten the time to payment.

Should I absorb card processing fees or pass them on to the client?

Most freelancers and small agencies absorb the fee and build it into their rates. Passing it on explicitly — “a 2.9% card surcharge applies” — can discourage card payments and add friction at exactly the moment you want things to feel seamless. The exception is very large invoices, where a percentage fee becomes a meaningful sum; in those cases, offering a fee-free bank transfer alternative is usually the cleaner solution.

How do I get paid by international clients without losing a lot to fees?

Wise is the most cost-effective option for most cross-border payments. It uses the mid-market exchange rate and charges a transparent fee, so both sides know what to expect. By contrast, a PayPal cross-border business payment can run around 5% or more once the international surcharge (~1.5%) and currency-conversion markup (~3%) are stacked on the base rate, and traditional SWIFT wires can involve multiple banks each taking a cut, making the final received amount unpredictable. If you invoice in your own currency rather than the client's, you also shift the currency-conversion burden to them — which some clients prefer because it's simpler for their accounting.

Does the payment method on my invoice really affect whether clients pay on time?

Yes — more than most people realize. The connection isn't about client intent; it's about inertia. A payment that takes two minutes gets done the day the invoice arrives. A payment that takes fifteen minutes gets scheduled for “later.” Payment method friction is one of the most consistent contributors to late payment that has nothing to do with the client relationship, and it's one of the easiest to fix.

Can I offer multiple payment methods at once?

Yes, and for most freelancers and small agencies, two options is the right number: a card payment link as the default and bank transfer details for clients who prefer it. More than two options can create decision paralysis and add clutter to the invoice. Keep the preferred method prominent and the alternative clearly labeled but secondary.

Let the reminders send themselves

InvoiceSnooze runs this exact cadence automatically — in a tone that still sounds like you.

Start free — no card required